LED twin spot emergency luminares exit ip65
Product Overview
LED twin spot emergency luminares exit ip65
Relative Download
DOWNLOAD
Description：
Dual spot emergency lights are emergency lights that provide illumination during a power outage. These lights consist of two adjustable spotlight heads mounted on a central housing unit that can illuminate different areas as required.
Designed to provide high-intensity illumination over a large area for emergency lighting, dual-point emergency lights are typically used in large public place environments such as industrial or commercial to ensure personnel's safety and facilitate evacuation in case of an emergency.
They are commonly used in factory warehouses, shopping malls, stadiums, general public areas, sidewalks, and other large spaces where more than traditional lighting sources may be required in emergencies.
>>LED Twinspot Emergency Lighting Luminaire, High-Performance
>>IS09001: 2008 certified quality system, 5-year warranty.
>>Emergency time is 1-3 hours per European and American standards.
>>Waterproof grade IP65 adapts to any wet environment and provides emergency lighting for your safety.
>>Lithium iron phosphate batteries have longer service lives, lower self-discharge rates, and higher high-temperature resistance and are safer.
FAQ:
1. Why is my LED emergency light flashing?
There could be several reasons, as follows
1. The battery is low or aged. Ageing batteries will cause the batteries to charge slower and be low on power, which will cause the emergency lights to keep flashing.
2. damaged bulb. Bulb damage is also one of the common causes of emergency lights flashing.
3. detection circuit problems. A malfunction in the detection circuit of the emergency light can also cause the light to blink.
4. the protective circuit is open. In some exceptional cases, the protective circuitry may be activated, causing the emergency lights to blink.
The LEDs indicate the current device status. Steady green on the LEDs indicates regular service; flashing green means the device is in test mode; flashing green/red indicates the battery is charging; and red (steady and flashing) indicates a fault or service alarm.
2. What is the minimum lux for emergency lighting?
1. The minimum horizontal illuminance on the floor of the evacuation aisle should be at least l.0 lx.
2, densely populated places, the minimum level of illumination on the ground level of the refuge floor (room) should be at least 3.0 lx; for ward buildings or surgical departments of the refuge room, it should be at least 10.0 lx.
3, stairwells, anteroom or shared anteroom, the minimum illumination level on the refuge aisle's ground level should be at least 5.0 lx.
- Product Description
- 图标
-
- Commodity name: LED twin spot emergency luminares exit ip65
Description：
Dual spot emergency lights are emergency lights that provide illumination during a power outage. These lights consist of two adjustable spotlight heads mounted on a central housing unit that can illuminate different areas as required.
Designed to provide high-intensity illumination over a large area for emergency lighting, dual-point emergency lights are typically used in large public place environments such as industrial or commercial to ensure personnel's safety and facilitate evacuation in case of an emergency.
They are commonly used in factory warehouses, shopping malls, stadiums, general public areas, sidewalks, and other large spaces where more than traditional lighting sources may be required in emergencies.>>LED Twinspot Emergency Lighting Luminaire, High-Performance
>>IS09001: 2008 certified quality system, 5-year warranty.
>>Emergency time is 1-3 hours per European and American standards.
>>Waterproof grade IP65 adapts to any wet environment and provides emergency lighting for your safety.
>>Lithium iron phosphate batteries have longer service lives, lower self-discharge rates, and higher high-temperature resistance and are safer.
FAQ:
1. Why is my LED emergency light flashing?
There could be several reasons, as follows
1. The battery is low or aged. Ageing batteries will cause the batteries to charge slower and be low on power, which will cause the emergency lights to keep flashing.2. damaged bulb. Bulb damage is also one of the common causes of emergency lights flashing.
3. detection circuit problems. A malfunction in the detection circuit of the emergency light can also cause the light to blink.
4. the protective circuit is open. In some exceptional cases, the protective circuitry may be activated, causing the emergency lights to blink.
The LEDs indicate the current device status. Steady green on the LEDs indicates regular service; flashing green means the device is in test mode; flashing green/red indicates the battery is charging; and red (steady and flashing) indicates a fault or service alarm.
2. What is the minimum lux for emergency lighting?
1. The minimum horizontal illuminance on the floor of the evacuation aisle should be at least l.0 lx.
2, densely populated places, the minimum level of illumination on the ground level of the refuge floor (room) should be at least 3.0 lx; for ward buildings or surgical departments of the refuge room, it should be at least 10.0 lx.
3, stairwells, anteroom or shared anteroom, the minimum illumination level on the refuge aisle's ground level should be at least 5.0 lx.Key words:- EM320
-
Relative Products
Slim Selectable Constant Power Conveter EM100H
The EM100H module is designed as an elegant, slim, and compact size. This current-select series consists of highly efficient, linear, constant current LED emergency converters with LiFePo4 battery pack. These converters provide economic and flexible solutions for indoor lighting applications.
High power emergency lights converter EM120H
Is worth mentioning that the Emtrons EM120H is the world's first high-power emergency drive in DALI 2.0 and will be certified by the DALI Alliance on August 1, 2022. The connection terminals are also IP68 certified, providing rugged protection for demanding wet environments, IP68 Industrial Waterproof Universal Voltage. Emergency Lights Converter in the power interruption: can be automatically converted to emergency lighting battery pack-powered equipment, to ensure that the lamps and others enough to continue emergency lighting, meet the needs of fire emergency lighting, to ensure that the power supply for the equipment in an emergency for up to 3 hours. Emergency Lights Converter While energized: recharges the emergency lighting batteries, keeping them on standby.
The EM618H range of LED emergency module is designed to suite the compact internal size of lighting fixtures for its emergency mode. It suits for almost panel luminaires, bulkheads, spotlights, downlights, and weatherproof fixtures, etc.
Led exit sign with emergency lights EM310
EM310 also known as fire safety exit evacuation indicator light and high grade waterproof and dustproof led bulkhead light ip65 bulkhead light It also holds an TUV mark and the ambient temperature can be up to 50℃ and the storage temperature is from -20℃to 50℃. This EM310 is very special, unlike ordinary LED emergency lights fixtures with higher dust and waterproof LED bulkhead light ip65, IP65 rated emergency lighting can completely prevent dust from getting in and can withstand water jets from all directions without damage.
Your feedback is so precious.
United Kingdom
Tel：
+44 (0) 7908 2626 32
Add：
291 Brighton Road, South Croydon,
London, CR2 6EQ, United Kingdom
E-mail：
China
Tel：
Add：
E-mail：
